Ground Polyurethane Application

It is an important contribution to the thermal insulation of the cold air depots projected by Polyurethane Foam application.

The thermal insulation applications of the cold air stores projected with Polyurethane Foam application provide high thermal insulation with less thickness and prevent energy loss. Polyurethane; It is the preferred insulation material with a wide range of usage in the temperature range of -50ºC to 120ºC. Rigid Polyurethane Foam thermal insulation application; specially equipped machine in mobile isolation vehicle and 2 component liquid material is applied to the application area with the help of heated hose and applied at high pressure under the special spray gun at the desired thickness as spraying on application surface.

It provides high energy saving.

Because it has closed cells, it does not contain bacteria and insects, it does not smell.

It prevents air, water and dust from passing through the roof.

It provides continuous insulation that lifts the heat bridges from the center.Food products are used in floor insulation.

Polyurethane Application

The cellular structure of the polyurethane foam material is not affected by water vapor and does not exhibit reduced thermal conductivity. Spray Polyurethane Foam does not allow the water vapor to penetrate into its interior. In this respect, insulation applications with Spray Polyurethane Foam are preferred more and more every day with their properties that are not affected by natural conditions for many years.Poliüretan kapalı hücre yapısı olduğundan en iyi ısı yalıtım malzemesidir.

These foams are called rigid foams because 96% of the resulting foam cells are closed and give a rigid structure. They keep a good heat. Therefore rigid systems are used for thermal insulation.

Technicial Specifications:

The Polyurethane Foam applied to the floor inflates to 30-40 times its own volume within a few seconds, the heat bridges being completely destroyed by the continuous coating ability of liquid polyurethane foam material sprayed to the application surface by means of a high pressure machine. The polyurethane foamed raw materials are the world's best thermal insulation materials due to their very low coefficient of thermal conductivity.

Spraying Polyurethane Foam application is quick and effortless. It allows thermal insulation coating of 500-1.500 m² per day.

Polyurethane Foam Properties:

Operating temperature values: -180 / + 110 C

Density: 35-45 kg / m3

Thermal conductivity: 0.022 W / Mk

Fire Class: B2

Closed cell ratio: 96%

Pressure tension: 0.18 N / mm2

Compression Strength: 0.14 MPa